Bicycling Safety for Drivers     beginner contents previous current next   expert contents previous current next > driver contents previous current next

2 Rules of the Road

The following provides a discussion of the traffic laws that apply to both drivers and cyclists, from the perspective of a driver.

2.1 Summary of Driver-Specific Rules

Drivers have several specific responsibilities towards cyclists. The basic rules that apply to drivers can be summarized as follows.

• When passing, drivers must give cyclists a sufficient amount of clearance (we recommend 3 to 5 feet as a minimum value).
• Drivers must stay out of a bike lane, except when crossing it or parking within it. To cross a bike lane or park, a driver must first merge into the bike lane, and may merge in within 200 feet of the driver's turn.
• Drivers must yield to bicycles when bicycles have the right-of-way. The same rules apply to bicycles as apply to any other vehicle.

2.2 Traffic Laws

A description of the laws in some states is available by visiting the links in the following table:

The main thing to keep in mind is that cyclists have the same rights as drivers, and may under some circumstances have to use a full traffic lane. Bicycles may also have to avoid hazards that would not cause a problem for a motor vehicle, and it is therefore wise to provide cyclists with ample clearance. If passing safely is not immediately possible, you can simply wait a short while until it is safe to pass. In heavy traffic, this "delay" will simply result in arriving at the line of cars at the next traffic light a bit later, with no real loss in travel time.

beginner contents previous current next   expert contents previous current next > driver contents previous current next